User manual

DG-BG4300N User Manual
Note:
If the WAN IP address appears 0.0.0.0, then click Retry for retrying the connection to Internet. If a valid
IP address appears, other than 0.0.0.0, then click Finish to complete the configuration.
Click ‘Next’ to continue with the installation.
Step 11 : In this page, you can set the SSID for wireless network.
Step 12 : Click ‘Next’ and the following page appears. In this page, you can select WEP or WPA-PSK
/WPA2-PSK as the security mode. Enter 5 characters for WEP key. And enter 8~63 characters for WPA-