Installation guide

Page 12
Online Support at www.digisender.net
DG420 Operation Guide
Controlling your
main television source
DigiSender takes full control over what source device
you watch on your main television. No more messing
about with SCART plugs - it’s all done from the
supplied remote control. Simply choose between
Satellite/Cable, DVD, VCR or Camcorder and the
Zentrum will route that device through to the TV.
SAT
VCR
AUX
SAT
DVD
AUX
DVD COPY FROM
VCR COPY FROM
POWER
‘MAIN TV’
A blue light will indicate the
source being transferred to
your main television.
There are two methods of choosing
what you watch on your main TV:
i) Main TV Control
Press to cycle between Satellite/Cable, DVD, VCR
and Auxiliary.
ii) Remote Control
Press ‘SAT/CABLE’, ‘DVD/r’, ‘VCR’, or ‘AUX’ to
choose the source on your main TV.
You must direct the remote control at the
DigiSender™ Control Zentrum™ transmitter unit.
Page 9
Please read this instruction manual carefully prior to installation
DG420 Installation Guide
continued...
SCART IN/OUT
AERIAL
IN
AERIAL
OUT
AUDIO/VIDEO 1
Main Television Set
Connect the ‘MAIN
TELEVISION’ socket to an
available socket on your
television.
VCR
Connect the VCR socket to an
available SCART on your your
VCR.
Switch off all appliances prior to
making connection changes!
DigiSender™
Control
Zentrum™
Transmitter
Connect the PSU to the transmitter
Plug the PSU into an available mains socket
TV
VCR