Installation guide

Page 14
Online Support at www.digisender.net
DG420 Operation Guide
Recording Satellite/Cable, DVD or
Camcorder on to your VCR
The DigiSender Control Zentrum can be easily set to
transfer satellite/cable, DVD or Camcorder to VCR
without changing any SCART leads or affecting what
you watch on your main or second television.
SAT
VCR
AUX
SAT
DVD
AUX
DVD COPY FROM
VCR COPY FROM
POWER
1
2
Selecting the VCR record source:
Press the button (1) to cycle between the source
transferred to your VCR for recording. The
selected source will be indicated on the front
panel (2).
IMPORTANT NOTES:
Selecting ‘DVD COPY FROM’ will automatically
set your main TV source to DVD. You may
manually change this by pressing the ‘Main TV’
button without affecting the copy.
You must select the correct SCART input on your
VCR for recording. For further information see
your VCRs instruction manual.
To select the SCART input, locate
one of the following buttons on
your VCR remote control:
AUX
LINE
SCART
INPUT
AV
Page 7
Please read this instruction manual carefully prior to installation
DG420 Installation Guide
continued...
POWER
1
2
3
1. ‘POWER’ Indicator. Indicates that power is present and the
device is switched on.
2. ‘DEVICE’ Control. Select what you watch in your second room -
Satellite/Cable, VCR, DVDR or Auxiliary.
3. ‘DEVICE’ Indicator. Indicates which input is being transferred to
this receiver and thus what is being watched on the second TV.
1. ‘Remote Relay’ Channel. This must be set the same on both the
transmitter and receiver.
2. Video Output. Composite (CVPAL) Video Output suitable for
connection to a television.
3. Audio Output. Left & Right Stereo Audio Output suitable for
connection to a Hi-Fi or television.
4. TV SCART Output. For connection to your television.
5. ‘Audio/Video’ Channel. This must be set the same on both the
transmitter and receiver.
6. PSU. Connect to the supplied mains adapter (PSU)
1
2 3 4
5 6