Installation guide

Page 10
Online Support at www.digisender.net
DG420 Installation Guide
Configuring the remote
control extender
The built-in advanced remote control extender
enables you to control the device you are watching
from the second tv.
OPTIONAL
Extension Pieces
Magic Eye
Emitter
BASE 2
For insertion under equipment
BASE 1
Base for the emitter and/or extensions
Step 1: Connect the magic eye to the transmitter.
Step 2: Assemble the magic eye system
Step 3: Position the magic eye system
120º
Remote control infra red
signals emit from the IR
Technik Systeme™ with a
120º angle ensuring
excellent coverage of
source equipment.
Page 11
Please read this instruction manual carefully prior to installation
DG420 Installation Guide
Connecting your
DigiSender Zentrum Receiver
The DigiSender™ Control Zentrum™ receiver is
designed to receive an audio/video source from the
transmitter. This could be your satellite or cable,
VCR, DVD or any other device connected to the
transmitter. It can be connected to any television
with a SCART socket or composite and left/right
audio connections.
Step 1: Connect the receivers SCART plug to your
second television.
Please see the upgrades section if your TV does
not have a SCART socket.
Step 2: Connect a DigiSender PSU to the PSU
socket on the rear of the receiver.
Step 3: Connect the PSU into an available mains
socket.
Switch mains power OFF prior to connecting the
PSU.
To select the SCART input, locate
one of the following buttons on
your TV remote control:
AUX
LINE
SCART
INPUT
AV
0