User manual

36
13.
a. ID Address Configuration
and Identification:
Since 16 iSWITCHs can be
daisy chained together to
share one CIC, each unit can
be individually named.
b. Name:
The name of each outlet can
be labeled to whatever you like
it to be called (i.e. server1,
DSL modem or webserver1).
c. Power Resume Delay:
The power resume delay is
convenient for sequential
startup.
d. Ring On/Reset:
Each outlet can be individually
programmed to enable ring
On/Off or reset. And phone
control. (Optional, see P.47)
e: Safe Shutdown/Reboot:
The safe shutdown feature has
a configurable delay time to
safely shutdown the NT server.
To enable this safe shutdown
function, in both NT and WIN
2000, you need to have three
setting for the UPS to
configure it.
Connect the communication
port on the rear of iSWITCH to
NT or WIN 2000 server with
the PC Communication cable.
Connect the corresponding
outlet on the rear of iSWITCH
to the NT or WIN 2000 server
with the PC input power cord.
Check the corresponding box
of safe waiting device
shutdown in iSWITCH
configuration page to enable
this function.