SDS

Report NoSA2004217S 05001
Dongguan Anci Electronic Technology Co., Ltd.
Address1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial, Development Zone, Dongguan City,
Guangdong Pr. China
Tel0769-85075888 Fax0769-58075898
E-mail:ada@anci.com Web: www.anci.com.cn
Page
6
of
11
Specific Hazards Arising from the Chemical
Under fire conditions, batteries may burst and release hazardous decomposition products when
exposed to a fire situation.
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide(CO)
Carbon dioxide
Other irritating and toxic gases.
Protective Equipment and Precautions for Firefighters
Firefighters must wear fire resistant protective equipment and appropriate breathing apparatus. The
staff must equip with filtermask (full mask) or isolated breathing apparatus. The staff must wear the
clothes which can defense the fire and the toxic gas. Put out the fire in the upwind direction. Remove
the container to the open space as soon as possible. Spray water on the containers in the fireplace
to keep them cool until finish extinguishment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Attention!Corrosive material. Avoid contact with skin, eyes or clothing.
Ensure adequate ventilation. Use personal protective equipment as
required. Evacuate personnel to safe areas. Keep people away from and
upwind of spill/leak.
Other information
Refer to protective measures listed in Sections 7 and 8.
Environmental precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to
do so. Should not be released into the environment. Do not allow to enter into soil/subsoil. Prevent
product from entering drains.
Methods and material for containment and cleaning up
Methods for Containment
prevent further leakage or spillage if safe to do so.
Methods for Cleaning up
Use personal protective equipment. Dam up. Cover liquid spill with
sand, earth or other Non combustible absorbent material. Pick up and
transfer to properly labeled containers. Clean contaminated surface
thoroughly.
7. HANDLING AND STORAGE