Specifications

DigiPoS Retail Blade
™
Manual
Test Sheet Completion
The following test result sheet should be used throughout the testing procedure to record
the failure condition of the DigiPoS Retail Blade™. If after completing the procedure the
DigiPoS Retail Blade™ cannot be repaired locally, please contact your nearest DigiPoS
Systems office and speak to a technical representative to discuss the problems you are
having. If you are asked to return the DigiPoS Retail Blade™, a copy of the test sheet
must be forwarded to your local DigiPoS Systems office observing any local RA
procedures as this will help expedite the repair procedure.
After the repair process has been undertaken, the DigiPoS Retail Blade™ will be returned
with a failure notification attached. If no fault can be found then the technicians at the local
DigiPoS Systems office as well as the technical manager will undertake a
training/diagnostic investigation to prevent any equipment being returned with no fault
found and to minimise future disruptions to your operation.
Page 99 of 103