Specifications

DigiPoS Retail Blade
™
Manual
Windows 95 & NT
The USB Support in Windows 95 (even OSR2) has never been stable or reliable and we
therefore advise that this function is disabled if you are not using USB devices.
Integrated Peripherals - Onboard Device Sub Menu
USB Controller
Enabled
Disabled
Enables or disables the on board USB controller
USB2.0 Controller
Enabled
Disabled
Enables or disables the on board USB 2.0 controller
USB Keyboard Support
Enabled
Disabled
Enables the use of a USB Keyboard (Standard functions
only) outside of an operating system.
USB Mouse Support
Enabled
Disabled
Enables the use of a USB mouse (Standard functions only)
outside of an operating system.
The USB options detailed above enable the use of a USB keyboard and Mouse under
DOS. If you are not using a USB keyboard and Mouse (i.e. BOTH are PS/2) then disable
all the above options.
PnP/PCI Configurations
PNP OS Installed
Yes
No
NT is not Plug and Play Compatible.
Windows 95 had some plug and play compatibility
although it is recommended that this is not utilised
Power Management
Please note that the Power Management settings should be left in their default state and
not activated under Windows NT as it is not supported and may cause system instability.
Windows 98, Me, 2000 & Xp (including Xp Embedded and Xp Embedded for POS)
Please note that the Power Management settings should be left in their default state and
not activated
One reason is that Customers have stated that they do not want the system going into
standby as the system could be used at any moment and they do not want to wait while
the system recovers from either a doze or standby mode.
Page 90 of 103