Specifications

DigiPoS Retail Blade
™
Manual
Details Cont.
Feature Options Description
Blank Screen This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Video Off Method
DPMS Support
Select this option if your monitor supports the Display
Power Management Signalling (DPMS) standard of the
Video Electronics Standards to select video power
management values.
Video Off in Suspend
Yes
No
Defines what state your monitor will go into when in
suspend mode.
Suspend Type
Stop Grant
PwrOn Suspend
Default Setting is Stop Grant
(Do Not change this setting unless instructed to do
so by DigiPoS Systems)
Disable
Suspend Mode
From 1 min
to 1 hour Max
After the selected period of system inactivity, all devices
except the CPU shut off.
Disable
HDD Power Down
From 1 min
to 15 min Max
This is the period of inactivity required before the HDD
shuts down
CPU THRM-Throttling
75.0%
50.0%
25.0%
This option controls the CPU speed as a percentage of
normal power during suspend mode.
Wake-Up by PCI card
Disabled
Enabled
Enabling this option will let the Retail Blade™ wake-up
via a PCI device or the LAN interface.
Power On by Ring
Disabled
Enabled
If you connect an external modem, enabling this option
will let the Retail Blade™ power on if the modem
receives a call.
Disabled
Enabled
If enabled, this option allows the Retail Blade™ to be
powered on at a specific time, on a specific date.
Date of Month
Enter the specific day you require the unit to
automatically power on or enter 0 for everyday
Resume by Alarm
Time
Enter the time you require the unit to automatically power
on
Reload Global Timer Events
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD,COM,LPT Port
PCI PIRQ[A-D]#
Disabled
Enabled
If any of these devices are enabled, any activity on the
enabled device will cause the standby countdown to be
re-set.
Page 83 of 103