Specifications

DigiPoS Retail Blade
™
Manual
Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Function [Enabled]
ACPI Suspend Type [S1(POS)]
x Run VGABIOS if S3 Resume Auto
Power Management [User Define]
Video Off Method [V/H SYNC+Blank]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
CPU THRM-Throttling [50.0%]
Wake-Up by PCI card [Disabled]
Power On By Ring [Disabled]
x USB KB Wake-Up From S3 Disabled
Resume by Alarm [Disabled]
x Date(of Month) Alarm 0
x Time(hh:mm:ss) Alarm 0 : 0 : 0
** Reload Global Timer Events **
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD,COM,LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
Menu Level f
Ç È Æ Å : Move +/-/PU/PD: Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6: Fail-Safe Defaults F7 : Optimised Defaults
Details
Feature Options Description
ACPI Function
Enabled
Disabled
Only select Enabled if you are running an operating system
compatible with Advanced Configuration and Power Interface
(ACPI).
ACPI Suspend Type
S1(POS)
S3(STR)
S1&S3
S1 sleeping state is a low wake-up latency sleeping state.
In S3 mode, the CPU, cache and chipset contexts are lost.
User Define
Min Saving
Max Saving
This option allows you to select the type (or degree) of power
saving for Doze, Standby and Suspend modes.
Minimum power management:
Doze Mode = 1 hr
Suspend Mode = 1 hr
Maximum power management:
Doze Mode = 1 min
Suspend Mode = 1 min
Power Management
This table describes
each power
management mode:
User Define:
Allows you to set each mode individually.
Page 82 of 103