Specifications

DigiPoS Retail Blade
™
Manual
IDE Options Sub Menus
The Master and Slave sub-menus accessed from the Main Menu control these types of
devices:
o Hard disk drives (including S-ATA)
o Removable-disk drives such as Zip drives
o CD-ROM drives
If you need to change your drive settings, selecting one of the Master or Slave drives on
the Main Menu displays a sub-menu like this:
Phoenix – AwardBIOS CMOS Setup Utility
IDE Primary Master
Item Help
IDE HDD Auto-Detection [Press Enter]
Channel 0 Master [Auto]
Access Mode [Auto]
Capacity 20021 MB
Cylinder 38792
Head 16
Precomp 0
Landing Zone 38791
Sector 63
Menu Level ff
To auto-detect the
HDD’s size, head…. On
this channel
ÇÈÆÅ: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5 : Previous Values F6: Fail-Safe Defaults F7 : Optimised Defaults
IDE Options Sub Menu Details
Feature Options Description
Channel 0, 1, Master/
Slave/
Channel 2, 3 Master
None
Auto
Manual
None = Either NO drive is installed or you can disable
any drive that may be installed.
Manual = Non-Functional in this BIOS.
Auto = Auto detect. The drive itself supplies the correct
information (Default)
Access Mode
CHS
LBA
Large
Auto
CHS = Cylinder, Head, Sector
LBA = Logical Block Addressing
Large = Large Disk Access Mode
Auto = Auto Detect correct mode for HDD in use.
Capacity N/A HDD size in Mb
Cylinder 1 to 65,536 Number of cylinders.
Head 1 to 16 Number of read/write heads.
Precomp
1 to 2048
None
Number of the cylinder at which to change the write
timing.
Landing Zone N/A
2048 Number of the cylinder specified as the landing
zone for the read/write heads
Sector N/A Number of Sectors per track
Page 69 of 103