Specifications

DigiPoS Retail Blade
™
Manual
Main BIOS Screen
Phoenix – AwardBIOS CMOS Setup Utility
fStandard CMOS Features
fAdvanced BIOS Features
fAdvanced Chipset Features
fIntegrated Peripherals
fPower Management Setup
fPnP/PCI Configuration
fPC Health Status
fFrequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type..
Details
Standard CMOS Features Frequency/Voltage Control
Standard settings like date, time, HDD, FDD etc. Advanced Settings
Advanced CMOS Features Load Fail-Safe Defaults
Advanced settings
Advanced Chipset Features
Advanced settings for the VIA chipset
Loads the Fail Safe default settings that were
programmed in at time of manufacture (Not Generally
Used as the settings are not OS specific and are only to
be used as a last resort)
Integrated Peripherals Load Optimized Defaults
Settings for the onboard devices
Power Management Setup
Loads the optimised default settings that were
programmed in at time of manufacture (Not Generally
Used as the settings are not OS specific and are only to
be used as a last resort)
Controls what devices remain active when a
computer has been left on with no activity for a
set period of time.
Set Supervisor Password
PnP/PCI Configurations
Allows for the option of a password to be set so that a
user is prompted for a password when the computer is
switched on or rebooted
Allows you to set IRQ’s to a specific configuration
such as Plug and Play or Legacy ISA.
Set User Password
PC Health Status
As above with the exception that access is restricted to
some of the BIOS settings.
Save & Exit Setup
Saves the changes you have made.
Gives current voltage and temperature
measurements inside the DigiPoS
Exit Without Saving
Exits the BIOS without saving any changes.
Standard CMOS Features
Page 66 of 103