Specifications

DigiPoS Retail Blade
™
Manual
Integrated Cash Drawer
The Retail Blade has two integrated cash drawer ports. This section displays the status of
the ports and allows the drawers to be opened. Some sites may have this feature disabled
in which case a dialog will appear indicating that you are not allowed to perform this
function.
If there is no drawer connected to a port it will indicate that the drawer is closed.
Some cash drawers invert the meaning of the open/close signal such that when they are
closed the circuit is open and when they are open the signal is closed. Due to the nature
of the circuitry in the cash drawer it is not possible to determine if a drawer is using
inverted signalling. If the case drawer signal is inverted the status will be reported opposite
of the actual status.
IO Ports
This lists the IO Ports used in the system. The information displayed in this area will not
change during a diagnostics session. If a new device is installed in the Retail Blade then
any new IO Ports used will be displayed during the next diagnostics session
Page 58 of 103