Specifications

DigiPoS Retail Blade
™
Manual
Temperature Status
The system has three active temperature sensors. These are the CPU temperature,
Northbridge and System temperatures. The readings displayed are in degrees Celsius.
Fan Speeds
There are two fans connected to the CPU heat sink, one pushes air while the other pulls it.
These are displayed as CPU Fan1 and CPU FAN2.
The system fan located at the rear of the Retail Blade™ is displayed as “System Fan” on
the diagnostics screen.
The Northbridge heat sink contains an integrated fan. The speed of this fan is displayed
as “NB Fan” on the diagnostics screen.
System Voltages
There are eight separate voltage measurements which are possible on the Retail Blade™.
The voltages are displayed in volts DC and will vary slightly depending on system
conditions.
CPU Status
The CPU status tab contains basic information about the CPU, indicating speed in Mhz,
Cache Size, processor flags and the Vendor ID string which is “GenuineIntel” for
processors used by the Retail Blade™.
Page 53 of 103