Specifications

DigiPoS Retail Blade
™
Manual
Power Supply Connector
Pin Wire
Colour
Description
1 White +24V DC
2 Green Remote Power Supply Switching
3 Black Ground
Shell - Not Connected
2.5mm Barrel Connectors
NOTE
If the 2.5mm barrel is being used to power an LCD, extra caution is to be taken in the
event that the cable becomes loose. If the cable becomes detached, either from the
DigiPoS Retail Blade™ end or the LCD end, first switch off the monitor using the power
button on the front of the LCD and then re-attach the cable. If this is not carried out
correctly, you risk damaging the DigiPoS Retail Blade™ if the LCD is left on while trying to
re-connect the cable.
Cash Drawer Ports
Pin Signal Name Direction
1 Frame GND -
2 Drawer Kick-out drive signal 1 Output
3 Drawer open/close signal Input
4 +24 V -
5 Drawer Kick-out drive signal 2 Output
6 Signal GND -
Page 46 of 103