Specifications

DigiPoS Retail Blade
™
Manual
Removing the CPU Heat Dissipation Assembly and the CPU Cont.
k) After you have lined up the CPU pins correctly, insert it into the socket on the
motherboard. With one hand, push lightly down on the top of the CPU to hold it in
place and to keep it fully inserted into the 478 socket. With the other hand, operate
the locking lever as previously described.
l) Re-fitting the CPU heat dissipation assembly is simply a reversal of the above
process taking care to re-fit the cables in the correct position and orientation.
Page 38 of 103