Specifications

DigiPoS Retail Blade
™
Manual
The CPU Heat Dissipation Assembly & CPU
The thermal transfer material on CPU heat dissipation assembly can be easily
damaged if the heat pipe is removed and refitted several times. We therefore
recommend that only DigiPoS Systems or authorized agents for DigiPoS Systems
attempt to remove the heat pipe. Failure to comply with this notice shall void all
warranties.
Removing the CPU Heat Dissipation Assembly and the CPU
a) Remove the Blade completely from the Host as previously described. Rest it on a
flat surface and observe anti-static precautions.
b) First, remove the multi strand cable that goes from the power distribution board to
the motherboard. A picture showing this is as follows:
c) Now remove the two remaining cables and connectors. It is only necessary to
remove the cables from the power distribution board and still leave the cables
attached to the motherboard. A diagram identifying these cables is as follows:
Removing the CPU Heat Dissipation Assembly and the CPU Cont.
Page 34 of 103