Specifications

DigiPoS Retail Blade
™
Manual
Options
PCI Cards
Please contact your EPoS distributor or DigiPoS Systems to discuss the wide
range of PCI card add-ons that are available to enhance your solution.
Dual VGA Cards
2nd CRT VGA, TV and LCD TMDS add-on cards
(Please contact DigiPoS Systems for advice on the appropriate selection of this
card)
RAID
The Retail Blade™ has the option for RAID functionality. The RAID levels
supported are 0 or 1 (not 0+1). This option will be discussed at greater length later
in the manual.
Important Notes
1 No connectors can be unplugged while the Retail Blade™ is powered. If any
connector is removed or replaced while the power is on, serious damage can occur
to the Retail Blade™. This is considered to be outside the scope of the warranty and
will attract a charge for the repair of any damage caused by this action.
2 The maximum dimensions of any PCI add-on card is as follows:
3 Under NO circumstances must the Retail Blade™ be removed from the Host
before the system has been powered down completely by switching off the
power on the external PSU. Failure to do this may result in serious damage to
the Retail Blade™ and is considered to be outside the scope of the warranty.
This will attract a charge for the repair of any damage caused by this action.
The correct procedure for removing a Retail Blade™ from the Host will be
discussed in a later section.
Page 24 of 103