Specifications

DigiPoS Retail Blade
™
Manual
External PSU
DigiPoS Systems recommends that the external PSU for Retail Blade™ is not situated in
the same space as the Retail Blade™ to minimise heat build up in enclosed spaces.
If this is unavoidable, forced air ventilation must be installed or the cavity size increased
to provide adequate ventilation for the Retail Blade™ & PSU heat dissipation devices. A
diagrammatic representation is as follows showing the new cavity size required and the
positioning of the external PSU:
Warning: Failure to observe the minimum ventilation requirements for the Retail
Blade™ will cause the unit to overheat. This will dramatically affect the performance
of the Retail Blade™ and may cause permanent damage which will not be covered
by the warranty.
Page 14 of 103