User manual
67DIGIOP™ Control User Manual
APPENDIX J: DATA SERVER STREAMS
• Listen Port – (for TCP connection type) the port through which the NVR/hDVR will receive data from the Gilbarco device. The IP
address of the NVR/hDVR is congured in the device.
• Serial Port, Baud Rate, Data Bits, Handshake, Stop Bits, Parity – (for Serial connection type) Settings of the Gilbarco device serial
port that is connected to the NVR/hDVR serial port.
• Associated Resources – Associated resources are used to congure fraudulent exception transactions. These items bind a
device to an analytic event. To use this feature, drag the analytic device into the associated resource for the device
Line Capture
Line Capture is a generic driver for receiving live data from a register that is not yet integrated into DIGIOP ELEMENTS™.
Parameter settings:
• Name – Name assigned to the line capture data. This name will appear as an item under the data server in the left frame.
• Line Ending Chars – Use default settings. Contact DIGIOP™ support for more information
• Max Line Length – Use default settings. Contact DIGIOP™ support for more information
• TCP or Serial – Option to receive data through a TCP/IP or Serial interface.
• Listen Port – (for TCP connection type) the port through which the NVR/hDVR will receive data. The IP address of the NVR/
hDVR is congured in the sending device.
• Serial Port, Baud Rate, Data Bits, Handshake, Stop Bits, Parity – (for Serial connection type) Settings of the sending device serial
port that is connected to the NVR/hDVR serial port.
• Associated Resources – Associated resources are used to congure fraudulent exception transactions. These items bind a
device to an analytic event. To use this feature, drag the analytic device into the associated resource for the device