User manual
3DIGIOP™ Control User Manual
SECTION 2: USING DIGIOP ELEMENTS™ SOFTWARE
SECTION 2
Using DIGIOP ELEMENTS™ Software
DIGIOPELEMENTS™ consists of DIGIOP™ Core, DIGIOP™ Data, and DIGIOP™ Control software and comes installed on hDVRs and
NVRs. This includes the basic application to view live and archived video, congure users, etc.
2.1 NVR Startup
The initial power-on and initialization of an NVR system is complete when the Windows 7 Professional desktop display similar to
the following, appears. No log on is required. The appearance of the Windows 7 desktop without the Kiosk mode display window
indicates that the server is operating in Service mode.
After the initialization of the server software is complete, you can log in to the system either locally or remotely through the
DIGIOP™ Control admin portal.
2.1.1 NVR Service mode desktop options
When the server is operating in service mode, you can perform any of the following:
• Open DIGIOP™ Viewer to search for, watch, and backup recorded video.
• Open DIGIOP™ Control on the server desktop (see the procedure later in this section).