User manual

59DIGIOP™ Control User Manual
APPENDIX G: SERVER HARDWARE TROUBLESHOOTING
Error Message Description
Hard-disk drive conguration error The hard drive failed initialization.
Hard-disk drive controller failure The hard drive failed initialization.
Hard-disk drive failure The hard drive failed initialization.
Hard-disk drive read failure The hard drive failed initialization.
Invalid conguration information-please run SETUP program The computer conguration information does not match the hardware conguration.
Invalid Memory conguration, please populate DIMM1 DIMM1 slot does not recognize a memory module. The module should be re-seated or
installed.
Keyboard failure A cable or connector may be loose, or the keyboard or keyboard/mouse controller may be
faulty.
Memory address line failure at address, read value expecting
value
A memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them.
Memory allocation error The software you are attempting to run is conicting with the operating system, another
program, or a utility.
Memory data line failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them.
Memory double word logic failure at address, read value
expecting value
A memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them.
Memory odd/even logic failure at address, read value expect-
ing value
A memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them
Memory write/read failure at address, read value expecting
value
A memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them.
Memory size in CMOS invalid The amount of memory recorded in the computer conguration information does not match
the memory installed in the computer.
Memory tests terminated by keystroke A keystroke interrupted the memory test.
No boot device available The computer cannot nd the oppy disk or hard drive.
No boot sector on hard-disk drive The computer conguration information in System Setup may be incorrect.
No timer tick interrupt A chip on the system board might be malfunctioning.
Non-system disk or disk error The oppy disk in drive A does not have a bootable operating system installed on it. Either
replace the oppy disk with one that has a bootable operating system, or remove the oppy
disk from drive A and restart the computer.
Not a boot diskette The operating system is trying to boot to a oppy disk that does not have a bootable operat-
ing system installed on it. Insert a bootable oppy disk.
Plug and play conguration error The computer encountered a problem while trying to congure one or more cards.
Read fault The operating system cannot read from the oppy or hard drive, the computer could not
nd a particular sector on the disk, or the requested sector is defective.
Requested sector not found The operating system cannot read from the oppy or hard drive, the computer could not
nd a particular sector on the disk, or the requested sector is defective.
Reset failed The disk re-set operation failed.
Sector not found The operating system cannot locate a sector on the oppy or hard drive.