User manual

42
www.digiop.com
APPENDIX B: HARD DRIVE CONFIGURATION
APPENDIX B
Hard Drive Conguration
DIGIOP™ systems perform specic hard drive partitioning. To view the contents of the hard drive, you must rst shut down
NetBackup Agent. See Appendix A for more information.
NOTE
Backup your system before shut down. The Backup feature is accessed from: TOOLS > Congure > System.
• DIGIOP™ systems are congured using multiple partitions.
• Partitions may contain the operating system, drivers, and setup or data les.
• Most les and software are in folders named DIGIOP or DissTech.
Table 3. Drive Partitions
Drive Size Description
CAUTION

Do not access or modify any drives unless specically directed to by DIGIOP™ Technical Support. Most les are encrypted and aect
system operation.
System C:\ Approx. 33.5 GB Windows OS and the system software; Windows folder structure
DATA D:\ Dependent on HDD size DissTech (video les), Database, and Index les
DVD R/W E:\ Drive Note: Drive letter may change
NOTE
To ensure that system conguration and license data is not lost, you must back up the system regularly or whenever the
system is recongured. The Backup feature is accessed from TOOLS > Congure > System.
OTHER DRIVES
Depending on the conguration of the system and the amount of storage space available, other drives may be used for data storage.
Once the system has consumed all DATA storage drives, it searches for the next drive in alphabetical order and starts recording data
on that drive.
NOTE
Any drive 4 GB or greater in size is considered by the system to be a storage device. The system will attempt to write data to it
after the DATA drives are full.