User manual
26
www.digiop.com
SECTION 4: USING VIEWER
5. The timeline is rst displayed in 24-hour intervals. Click anywhere on the timeline to select an hour [2]. You can also select
the date from the calendar [1, above] and change the hour or minute with the up and down arrows on the Hour/Min clock
[3].
6. Use the video controls [4] to control the video playback. Be prepared to stop and rewind the video, fast forward, etc.,
to locate the desired segment. Speed up or slow down the playback speed of the video [5] using the slide control. The
maximum playback speed is “8X.”
Move to end of available les
Frame by frame step forward
Play forward at selected speed
Pause/Stop
Reverse play at selected speed
Reverse frame by frame
Move to beginning of day les
7. Double click once on the dark bar at the top of the time line to zoom in to a shorter time interval. The time zooms in
(expands) from 24 hours to approximately six hours, with the selected time roughly in the center of the time line.
8. Slide the vertical scan bar along the time line to another time. You can also move the slide control below the time line [6] to
the right or left to change the time.
6
9. Double click a second time to zoom to a shorter time interval. The time line now shows slightly more than three hours. (The
next time you double click, the time line returns to the 24-hour time period.
10. When you locate the desired section of video, you can zoom in to see more details. Here is an example of how the video can
look at maximum zoom. Zoom magnies the image in 48 incremental steps.