User manual

16
www.digiop.com
SECTION 3: USING DIGIOP™ CONTROL
3.7 Create Group
A group is a selection of cameras and/or data streams that can be displayed as a unit with DIGIOP™ Connect. Groups can be
displayed individually, with other groups in a Tour. To create a group:
1. Click the Group entry in the left frame of the Home page, then click the New button at the top of the window.
2. In the Group settings window, enter the name of the group in the Name eld.
3. Open the Layout drop down list and select the preferred split-screen arrangement for the group. In the Example above, a
2x2 split-screen layout was selected.
4. Add a camera or data stream to the group by dragging the camera/data stream entry from the tree in the left frame and
dropping it into a of the frame in the group layout display. Two cameras were added to the layout shown above.
5. Click Save to update DIGIOP™ Control, then click Refresh to update the screen information.