User manual
9DIGIOP™ Control User Manual
SECTION 3: USING DIGIOP™ CONTROL
3.3 Add IP cameras to the NVR/hDVR
The DIGIOP™ server will automatically discover the IP cameras it can connect to. To add these IP cameras to the NVR/hDVR:
1. Find the Systems entry in the list in the left frame of the home page,then click the icon to open the Systems list. Inside
the Systems list are two entries for the NVR/hDVR you connected to. The one prefaced with the blue “display” icon identies
the video server. The one below it with the yellow “barrel” icon identies the data server.
Video
Server
Data
Server
2. In the Systems list, click the hostname of the video server, then click the New button at the top of the Home page. The Add
Camera pane will open in the right frame. The hostname for the NVR in this example is C5WSDP1.
3. In the Add a Camera frame, nd the IP address of the camera you want to add, then click the associated select action link.
The camera will be added to the system and automatically assigned to a camera channel in the NVR or hDVR.
After a camera is added to the NVF/hDVR, the entry for the IP address under Channel Number shows the channel the camera
is assigned to.