User manual
2
www.digiop.com
SECTION 1: INTRODUCTION
1.1.1 Initial check for software updates
By default, DIGIOP™ Connect will check for updates automatically after login. Updated software ensures that you have the most
recent enhancements for both the DIGIOP™ Connect software and online help. The automatic update feature can be disabled (see
below).
NOTE
Installing a DIGIOP™ Connect software update retains all conguration settings (including video and data source settings)
made previously.
To update the initial installation of DIGIOP™ Connect software
1. Launch DIGIOP™ Connect by double clicking the desktop icon or opening it from the Start menu. The DIGIOP™ Connect login
window will open.
Connect Login window
2. Click Login to start DIGIOP™ Connect. (Initially, no Username and Password is required to start DIGIOP™ Connect.) If a newer
version of DIGIOP™ Connect is available, follow the on-screen instructions to install it.
1.1.2 Automatic software updates
Automatic DIGIOP™ Connect software updates are enabled by default. The rst time this software is used, it checks newer versions
of the software, and updates itself automatically. To perform this check whenever DIGIOP™ Connect is launched, skip this procedure.
To disable this feature, do the following:
1. After logging into DIGIOP™ Connect, click the icon in the upper-left corner of the DIGIOP™ Connect window.