User manual

21DIGIOP™ Connect Software User Manual
SECTION 4: CAMERA CONTROLS
4.2 Using camera preset controls (PTZ cameras only)
The Preset Controls allow you to setup a PTZ camera to quickly move to preset target. Each target position is assigned a number.
When the camera is selected and the number is “Called”, it quickly moves to that target.
• Set – Click to assign a number (1 to 32) to the position currently being used by the camera.
• Call – Click to move the camera to the pre-designated direction.
To assign a preset number to a camera direction:
1. Use the PTZ direction controls to aim the camera at a target.
2. Click the number (1 to 32) to assign to the camera direction.
3. Click Set to assign the set direction to the number.
4. Repeat Steps 1-3 above for each additional camera.
To Call the camera to a preset direction:
1. Select the camera viewing frame.
1. Click the number (1 to 32) assigned to the camera direction you want see. The number will appear in the blank box.
2. Click Call.
4.3 Using digital zoom camera controls
The controls listed below will work with all digital video cameras (including PTZ cameras). The controls become active for the
camera selected in the viewing pane (refer to “View Video or Data”) and the “Video” tab is the tab in use. The digital zoom video
camera controls are:
• Maintain Aspect ratio – Click this control to toggle between the original width and height of the video (whatever the
camera is set to), and the width and height of the viewing pane. The video will assume the size (ratio of the width and
height) of the viewing pane.
• Zoom In/Out – To use this feature, select the camera pane, click the Enable Digital Zoom icon in the Media menu (see
above), then use the “+” and “-” keys on the keyboard or the mouse wheel to zoom in and out.