User manual
19DIGIOP™ Connect Software User Manual
SECTION 3: VIEW VIDEO OR DATA
3.5 Undocking and re-docking viewing tabs
Any selected tab can be undocked from the DIGIOP™ Connect software panel. This feature allows the undocked tab to be moved
freely on the desktop while simultaneously viewing other tabs still attached to the software panel. See below. The undocked tab
can be re-attached (docked) with a single mouse click.
To release a viewing pane tab so that it is unattached from the DIGIOP™ Connect software panel, perform the following steps:
This feature allows for full multi-monitor support. This feature can be setup so that one tab can be showing live video from a
camera, while another tab can be used for searching recorded video.
1. Make sure the viewing tab to be released from the software window is active in the viewing area.
NOTE
The undock feature aects all of the frames being displayed in the tab.
2. Either click the Undock tab icon, or click and hold the tab and drag it from the software window.
Drag the viewing tab out of the
window to make a separate window
3. To re-attach the viewing tab to the DIGIOP™ Connect software window, click the Dock tab icon.