User manual
7DIGIOP™ Connect Software User Manual
SECTION 2: CONFIGURING CONNECT
— Password – This is the password associated with Username.
— Port – (Visible for data servers only.) The TCP/IP port number that DIGIOP™ Connect will use to connect to the data
server. The default port number used by DIGIOP™ Connect is 24752.
— Time zone – (Visible for Video Servers only). Select the time zone where the Video server or data server is located
from the drop-down list.
— Name (optional) – This is the name that identies the video server or data server within DIGIOP™ Connect.
— Description (optional) – Enter a description of the system or other information.
4. Click Save. DIGIOP™ Connect will connect to the video server or data server and display the Name in the left panel Systems
list.
Example List of Systems