Specifications

A & E Specifications
DIGIOP ELEMENTS V8.6 DIGIOP, Inc.
Page 19 of 24
3. LOGIN to a DIGIOP hosted system: The software shall allow the user to login to
a DIGIOP-hosted DIGIOP NVR or hDVR. The user account shall have a unique
Customer Name assigned by DIGIOP and the connection settings, users,
permissions, Groups, Tours, and system setup are saved by DIGIOP and on the
local computer. A hosted login shall allow the user to log in and retrieve settings
with any computer running the DIGIOP Connect software.
4. LOGIN to a DIGIOP ELEMENTS system on the same computer: The software
shall allow a user to login to a DIGIOP NVR or hDVR server that is installed on
the same computer as DIGIOP Connect (localhost system). During the login
process, no username or password shall be required. on the same computer as
the server (localhost). Connect to a single DVR or NVR. Access to the DVR or
NVR shall provide all the privileges assigned to the username, including all
Groups and Tours configured through DIGIOP Control for this user. With this
option, connection is to both the video and data server on the DVR or NVR.
5. After login authentication and verification of the target system is confirmed, the
software shall check for and install software updates, if configured to do so.
C. LOGGING OUT
The software shall have the capability of allowing a user to log out of the system at any time.
D. PRIVILEGES ASSIGNED IN DIGIOP CONTROL
The software shall allow the user to perform only those functions that the user has been given
privileges for through DIGIOP Control, which may/may not include the ability to configure
groups, tours, system configuration, etc. While the software shall allow an Administrator or
someone with administrator privileges to perform any of the functions and set up any of the
features within DIGIOP Connect, certain other users may have limited privileges and set up
rights, assigned by the Administrator.
E. DIGIOP CONNECT MAIN WINDOW
The software shall also display a Systems Tree (down the left side) with Groups and Tours
folders under it. As new Systems, Groups, and Tours are added, the names of these shall be
displayed in the appropriate folder.
The DIGIOP CONNECT software shall initially display the DIGIOP Connect main window
containing three top-level icons: Home, Media, Configuration and Notifications.
1. Home tab: Shall be used in conjunction with the Live, Search, Replay, Layout,
Save Image, Save Groups, Filter Query, and Save Profile to configure these
function
Three additional sets of control icons, which include Experience, Tabs, and
Save, shall be used to manipulate the functions in the Connect main window:
 Experience
 Live — Shall display selected live camera views from the Systems or Groups lists
 Search — Shall access Calendar and Thumbnail Searches to find video
 Replay — Shall allow quick searches of video within the past 15 minutes in 1, 2, 5,
or 15 minute intervals
 Tabs
 Add Tab — Shall allow the user to add more tabs to the dashboard, configure them
with camera layouts, and name them for reference. The software shall be capable of
supporting as many tabs as the system hardware resources allow.
 Close Tab — Shall close a selected tab
 Clear Selected — Shall remove camera video or data from the selected tab
 Layout — Shall display a selection of camera and data layouts, ranging from 1 x 1
frame grids to 6x6, for 36 cameras and data in one layout. The software shall also
support various pre-configured wide layouts and data layouts.
 Undock Tab — Shall allow the user to select and move a tab freely to make a
separate window while viewing other tabs still attached to the software panel for
multi-monitor support.