Specifications

A & E Specifications
DIGIOP ELEMENTS V8.6 DIGIOP, Inc.
Page 11 of 24
 Video Port
 HTTP Port
 Username
 Password/Confirm Password
 Codec/Resolution (provided by camera)
 Frame Rate (provided by camera)
 Record Mode
 Motion and event
 Continuous and event
 Event only
 Pre-record seconds
 Post-record seconds
 Use Audio
 Use Analog Audio
 Tunnel RSTP/RTP over HTTP
 Associated Resources
 View Camera’s Webpage - when clicked, this link shall display the camera’s webpage.
 Configure Motion Settings
2. IP Camera editable settings include:
 Name
 Channel input number
 Record Mode
 Motion and event
 Continuous and event
 Event only
 Pre-record seconds
 Post-record seconds
 Use Audio
 Camera Resolution: CIF, 2CIF, or 4CIF
 Camera Frame Rate
 Configure capture card (global capture card settings)
 NTSC / PAL
 MPEG4 / H.264
 Frames per second (FPS)
 Use PTZ
 Associated Resources
 Configure Motion Settings
K. ADD DATA SERVER STREAMS
The software shall be capable of integrating within the DIGIOP Data Server several back-office
systems with the video and audio capture capabilities of the video server. The software shall be
capable of supporting in the Data Server these entry fields for each system:
 Name
 Number of Registers
 Frequency (ms) [of the stream in milliseconds]
 Associated Resources (entry box that allows resources for the camera to be added).
The software shall be capable of supporting in the Data Server the following Preset Data
Servers:
1. APC NetBoltz parameters include:
 Name assigned to the data stream
 IP Address of the device
 Username/password to connect to the device