Specifications
A & E Specifications
DIGIOP ELEMENTS V8.6 DIGIOP, Inc.
Page 10 of 24
Scene Loss: A lack of change of color variation in the video image was detected. This event
must be enabled in the DIGIOP ELEMENTS™ system software. This event is reported when
it occurs, and once per hour during a sustained outage.
System Offline (DIGIOP® hosted systems only): The system does not respond to a ping
command. This event is reported when it occurs, and once per day during a sustained
outage.
Video Loss: No video signal was received by the DVR. This event is reported when it occurs,
and once per hour during a sustained outage. DIGIOP Control Notifications can be
individually enabled and disabled.
The Software can be used to disable individual Customer-level notifications.
F. ADDING IP CAMERAS TO A DVR or NVR
The software can be configured to automatically discover and automatically configure IP
cameras it can connect to. These discovered cameras shall then be added to a selected system
DVR or NVR Video Server where they are assigned a Channel Number for use in the system.
Once added to the Video Server by the user, the cameras shall be listed in the Object Tree.
G. MANUALLY ADDING IP CAMERAS
The software shall be capable of allowing the addition of cameras that are not automatically
discovered on the network by the Video Server. The software shall be capable of letting the
user select a camera from a list of supported camera brands, enter a name and other
information about the camera, and then save the new camera entry. The new camera shall then
be added to the Video Server list. The software shall also be capable of providing additional
configurations items after the Video Server has been synced to the Video Recorder.
The software provides the following configuration options for adding a camera:
1. Brand (drop-down arrow to access supported camera brands, see Features
above
2. Name (associated with the camera)
3. IP Address (of the camera)
4. Video Port 80 (pre-populated; not editable)
5. HTTP Port 80 (pre-populated; not editable)
6. Username, Password/Confirm Password
H. ADDING ANALOG CAMERAS TO THE hDVR
Analog cameras are added to the hDVR by connecting their video output to an NTSC input
channel on the video capture card installed in the DIGIOP hDVR server hardware. The video
channel assigned to the camera in DIGIOP Control is determined by the physical port of the
capture card the camera video cable is attached to.
I. ADDING AUDIO CHANNELS TO AN NVR OR hDVR
1. DIGIOP NVRs accept audio channel feeds that are embedded in the TCP/IP
channel data from an IP camera with audio capability.
2. DIGIOP hDVRs accept two kinds of audio channel feeds:
Audio channel feeds that are embedded in the TCP/IP channel data from an IP camera
with audio capability.
Analog audio feeds that are physically connected to the audio input card. The channel
number assigned to the audio input is determined by the connector the audio cable is
connected to, and associated with the video input channel with the same number.
J. EDIT CAMERA SETTINGS
The software supports the editing of individual camera settings in the Video Server using the
Edit icon. Editable fields shown in the Camera window are determined by the type (analog, IP)
of camera being shown.
1. IP Camera editable settings include:
Brand
Name
IP Address