Setup guide
14
www.digiop.com
SECTION 3: SYSTEM SETUP
NVR server desktop display
2. Click the clock and date entry in the lower-right corner (system tray) of the desktop. Click Change Date and time
settings.., then use the accepted Windows 7 system procedure to congure your server with the local time and time zone.
3. Use the accepted Windows 7 system procedure to congure the network settings of you NVR.
4. Skip to the next subsection of this manual.
3.8.2 Conguring hDVR clock and network settings (AH, EH, PH series
systems)
1. Power on the hDVR and allow it to progress to the DIGIOP® Kiosk mode display (see the following screen capture). If the
analog cameras attached to the server are powered on, video feeds from these cameras should appear in the display.