User manual

21H.264 Megapixel Indoor/Outdoor Dome IP Camera
SECTION 2: INSTALLATION AND SETUP
2.8 Aim, focus, and image quality adjustment
2.8.1 Aim
The camera mount allows the camera to be rotated on three axis to set the horizon alignment, horizontal direction, and up/down
position of the video frame.
Up/down positionHorizontal directionHorizon alignment
Lens shroud
1. Gently lift the lens shroud o the camera assembly to remove it from the camera assembly.
2. While observing video from the camera, set the horizon alignment by rotating camera module bracket on its horizontal axis
(direction the lens is pointed).
3. Set the horizontal direction of the video frame by rotating camera assembly on its vertical axis.
4. Set the up-down position of the video frame by point the lens up or down.
5. If necessary, make additional adjustments to these settings to perfect the frame of the video.
6. Reinstall the lens shroud
7. Reinstall the camera dome.
2.8.2 Focus
The lens focus and iris is set at the factory and requires no further adjustment.
CAUTION
If a camera with a high zoom lens is subjected to a temperature variation of about 18˚F or more, a change of focus may
occur. Make sure to consider the environment when installing a camera with a high zoom lens.