User manual

www.digiop.com

SECTION 2: INSTALLATION AND SETUP

1. Open the IE browser.

2. In the URL eld (Internet address), enter the IP address for your camera in the format:

http://<IP address>/

where <IP address> is the IP address of your camera. Following the example earlier in this guide, the entry would be:

http://192.168.1.201

3. If prompted to install an ActiveX control such as AxAll.cab (publisher Cap Co), follow screen prompts to install the software.

IE prompt to install ActiveX control

NOTE

To load these ActiveX controls, you may need to adjust the security settings of your browser to accept add-ins from

unknown publishers.

Typical initial camera view