User manual
14
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
Example: Typical use of ipcong in Windows XP
d. Enter the IP Address, Subnet Mask, and Default Gateway for your PC’s Ethernet adapter into Table 1.
NOTE
The Ethernet adapter data you see by using ipcong will probably be dierent from that shown in the example above. If
you are using Windows Vista or Windows 7, the IP address is identied as the “IPv4 Address.”
Table 1. PC/Camera network settings
Computer (PC) Camera
IP Address
Subnet Mask
Default Gateway
CAUTION
If connecting your camera to an enterprise network, consult with your network administrator for the
camera IP address, subnet mask, and default gateway.
Find network settings (IP addresses) that are not in use
1. At your PC, nd an IP address on your network that is not in use:
a. Write down the EXACT IP address of your PC up to the third/last period. Using the example shown above, this
expression is: 192.168.1.
b. After the third period, include any number between 1 and 254 that is dierent from the one in your PC’s IP address,
168. As a rst try, let’s choose 200, which will form the IP address 192.168.1.200.