User manual

3Indoor/Outdoor Mini-Dome IP Camera
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your dome camera includes the following:
• BLK-IPD103 camera
• DC power adapter with power plugs for dierent powering sources
• Hardware installation kit with a 3 screws and wall inserts
• Camera cover opener tool
• CD with IPAdminTool software and documentation
• Quick Installation Guide
2.2 Tools you need
To install the camera, you will need:
• Phillips #2 screwdriver
• PC with Microsoft
®
Windows
®
XP SP3 or newer, 32- or 64-bit system
Depending on how the camera is mounted, you may also need:
• Hammer
• Drill with bits for drilling mounting holes
• 1-3/8” hole saw
2.3 Mount the camera
1. Determine where the camera will be mounted and record the Media Access Control (MAC) address of the camera. The MAC
address can be found on the label on the base of the camera. Record the information in the following table.
Location:
MAC address:
2. Separate the camera cover from the camera base. Insert the cover removal tool into the slot on the side of the camera, then
gently twist the tool to pry o the cover.