User manual

20
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
2. On the VIEW screen, click: SETUP > Video & Audio > Audio
to open the Bi-directional Audio Settings menu.
3. In the Bi-directional Audio Settings menu, click the check boxes to select “Listen to the audio from server with setting
below” and “Talk to the speakers of server”.
4. Click Apply, and then click VIEW to return to the camera view screen.
5. On the VIEW screen, check the SPK and MIC options to enable the speaker at the camera and the microphone on your
computer.
6. At your computer, listen for sounds from the microphone at the camera. If necessary, adjust the volume level in the camera.
Click: SETUP > Video & Audio > Audio
to re-open the Bi-directional Audio Settings menu. In the Listen frame, adjust the volume to the preferred level. Click Apply.
7. Use a microphone at your PC to send audio to the speaker at the camera. Verify that your microphone audio is heard at the
speaker.
To adjust the speaker volume go to the Bi-directional Audio Settings menu. In the Talk to frame, adjust the volume to an
appropriate level. Click Apply.