User manual

17Indoor/Outdoor Mini-Dome IP Camera
SECTION 2: INSTALLATION AND SETUP
Up/down positionHorizontal directionHorizon alignment
1. While observing video from the camera, set the horizon alignment by rotating camera module bracket on its horizontal axis.
Tighten the retention screw to hold the horizontal alignment position in place.
2. Set the horizontal direction of the video frame by rotating camera assembly on its vertical axis. Tighten the retention screw
to hold the horizontal direction position in place.
CAUTION
Do not over-rotate the camera mount gimbal. Excessively rotation can damage the camera assembly.
3. Set the up-down position of the video frame by tilting the lens up or down. Tighten the retention screw to hold the
horizontal elevation in place.
4. If necessary, repeat these adjustments to perfect the frame of the video.
2.8.2 Adjust focus and zoom
Camera focus and zoom is adjusted with the focus and zoom pullers.