User manual

56
www.digiop.com
SECTION 8: UMS SINGLE CLIENT SOFTWARE
Button Function Description
CALENDAR
In the calendar frame, dates with recorded video are colored in light blue.
Click the date of the recorded video you want to nd or play.
FUNCTIONS
CAPTURE: Capture a still image of the screen/camera.
MARK IN: Set the start time at the marker position
MARK OUT: Set the end time at the marker position
SETUP: Display the setup screen of the network viewer.
BACKUP: Backup the video clip from MARK IN time to MARK OUT time
HDD USAGE DVR HDD space used Indicator.
AUDIO Adjust the volume. The audio is on or muted by clicking the speaker icon.
TIMELINE Bar
Displays a timeline for the date selected in the calendar frame. Time spans
when video is recorded are marked in blue. To expand the display for an
hour when video was recorded, drag the marker to the hour you want to
expand, then click the 0 - 60 button (located below the time line).
PLAYBACK BUTTONS
Use the playback buttons to control video playback. The playback buttons
are labeled with the standard icons used for video play control.
8.6.1 Searching for and playing video recorded by the DVR
1. At the UMS Single Client, connect to the DVR.
2. Press the SEARCH button. The client will change from live mode to search mode.
3. In the calendar frame, click the date when video was recorded.
4. Drag the marker on the timeline to the time at which you want to play recorded video. To expand the hour within which the
marker lies, click the 0 - 60 button below the time line.
Marker
5. Click the PLAY button to begin playing video at the marker position.