User manual
50
www.digiop.com
SECTION 8: UMS SINGLE CLIENT SOFTWARE
In the Site Addition menu, enter:
• Model: Select N Series DVR, HD DVR if you are connecting to a BLK-DH200400D, BLK-DH200800D, or BLK-DH201600D DVR
• Site Name: Enter an appropriate name for the DVR you will connect to.
• IP Address: Enter the IP address and web port number (if other than 80).
• Port No: Enter the port number for the DVR. The default DVR port number is 5445.
• ID: Enter your login ID (login name).
• PASSWORD: Enter the password associated with the login ID. The default login ID and password are Admin and 1111.
• Channels: Enter the number of channels supported by your DVR (4, 8, or 16).
After entering all elds in the Site Additions menu, click OK to save your entries and exit the Setup menus.
8.4.3 Event Setup
To open the Event menu, click the Event entry in the left frame of the Setup window. The Event menu allows you to congure how
the client will display and log event information received from the DVR.