User manual

44
www.digiop.com
SECTION 7: FIRMWARE UPGRADE
Submenu
Button
(Virtual
Keyboard)
8. In the USER PASSWORD window, select the USER ADMIN if not shown.
9. In the CURRENT eld, click the submenu button to open the virtual keyboard. Enter “12341234”, then select OK.
10. Return to the USER PASSWORD window and select OK. The DVR will restart and open a Diagnostics screen.
11. In the Diagnostic screen menu, select USB Upgrade.
NOTE
To exit the Diagnostics screen and restart the DVR, select Boot Application in the Diagnostic menu.
12. Follow the on-screen instructions to install the rmware upgrade. After the upgrade is completed, select Boot Application
to restart DVR.