User manual

22
www.digiop.com
SECTION 3: SYSTEM SETUP
Item Description
NTP NTP (Network Time Protocol): Use to synchronize the clocks of computer systems over variable-latency data networks.
PRIMARY SNTP SERVER: Use the virtual keyboard to enter the address of the primary NTP time server.
SECONDARY SNTP SERVER: Use the virtual keyboard to enter the address of the secondary NTP time server.
TIME ZONE: Select the oset from GMT (Greenwich Mean Time).
CONNECTON MODE: Select an NTP time server connection mode (INTERVAL/TIME).
INTERVAL: Synchronize the clock by hours shown on the connection period option.
TIME: Synchronize the clock at the time daily shown on the connection period menu. CONNECTION PERIOD: 1 ~ 24.
3.7 SECURITY menu
Clicking the SECURITY tab opens the security menu. Navigate through the menu items using the p, q, t, and u buttons, press
SEL to select the item, use the
p, q, t, and u buttons to change the value, then press SEL again to conrm that value. Move to
the next item you want to change using the the
p, q, t, and u buttons. To return to setup menu screen, press the ESC button.
NOTE
You must be a user with Admin permissions to congure the SECURITY menu.