User manual

16
www.digiop.com
SECTION 3: SYSTEM SETUP
3.4.2 SPOT-OUT setup
Table 9. Menu Item in SPOT-OUT Setup Screen
Item Description
SPOT OUT SPOT 2 only
SPOT TYPE SPOT 2 supports FULL type.
SPOT ON EVENT Enable/disable display of the channel when an event is active. SPOT 2 displays when event is active.
SPOT EVENT DWELL TIME Set the dwell time for the event activated channel (1 - 10 sec).
SEQUENCE Enable/disable sequential display of spot channel(s) in full screen. If ON is selected, the spot channel is displayed.
SEQUENCE-DWELL TIME Set the dwell time for the spot channel display (1-10 sec).
SPOT CHANNEL
Select a channel for spot monitoring. Press SEL and select channel using the p, q, t, and u buttons, then press SEL.
3.4.3 PTZ Setup
To control the PTZ functions of the camera, connect the PTZ controller to the RS-485 port on the back of the chassis with CAT 5 (or
equivalent) cable.