User manual
15H.264 DVR User Manual
SECTION 3: SYSTEM SETUP
Item Description
ALARM OUT Set the sensor, motion, and video loss for each alarm.
PTZ Set the PTZ camera speed, number, type and ID.
SPOT-OUT Set the conguration for SPOT 2 monitoring only.
CHANNEL Select specied channel for motion zone setup.
MOTION ZONE Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY Set the motion sensitivity for the specied channel. (1 ~ 9).
KEY TONE Enable/disable tone when key is pressed. .
REMOTE CONTROL ID Select an ID for the remote control.
1. Select ID number.
2. On the remote control, press the same number as the ID set in the DVR.
3. An icon will be displayed on Live screen that corresponds to the remote control. (0 ~ 99)
SENSOR Select sensor number. (1 ~ 4)
TYPE Set the type of sensor for the specied channel. (OFF, N/O (normal open), N/C (normal closed)).
3.4.1 ALARM OUT submenu
Table 8. Menu Item in ALARM-OUT Setup Screen
Item Description
ALARM OUT 1 only.
SENSOR IN Enable setting 1 of 4 cameras for each alarm.
MOTION ON Enable setting 1 of 4 cameras for each alarm.
VIDEO LOSS ON Enable setting 1 of 4 cameras for each alarm.
ALARM DURATION Set the alarm dwell time. (5 ~ 60 seconds).
ERROR ALARM Set the error type for the alarm activation. (OFF, ALL, HDD ERROR, VIDEO LOSS).