User manual

www.digiop.com

SECTION 3: SYSTEM SETUP

Table 6. Menu Items in Recording Mode Setup

Menu Item Description

CHANNEL

Highlight the eld with the p q buttons, use the t u buttons to display a channel you want, then press SEL. You can also

highlight and select the submenu button to open the RECORD PROPERTY window.

In the RECORD PROPERTY window, use the p, q, t, and u buttons to highlight a parameter, press SEL, use the p, q, t,

and u buttons to change the parameter value, then press SEL. Highlight the OK button and press SEL to conrm the settings

and close the window

RESOLUTION

Select either CIF, Half D1, or D1 using the p, q, t, and u buttons.

FRAME RATE Set the frame rate for the specied channel. The sum of the frame rate values from each channel cannot exceed the maximum

frame rates for a specic recording resolution. The maximum video frame rate is 120 fps.

QUALITY Select the recording quality for the specied channel. Options are: Network, Standard, High, Superior and Ultra.

RECORDING Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule, or Disable.

PRE RECORD Enable/disable pre-event recording. Pre-event recording time is 5 seconds (video from 5 seconds before the event is recorded

with the eventt). Only intra-frames are recorded during pre-event recording.