User manual

94
www.digiop.com
APPENDIX A: HDD REPLACEMENT
APPENDIX A
HDD Replacement
The hard disk drive (HDD) included in your system is a security grade device, factory tested and certied to be functional with all
operations of the DVR.
> > > OPENING THE DVR ENCLOSURE WILL VOID THE WARRANTY < < <
If you need to change the HDD installed in your DVR, return the device to DIGIOP for a factory installation (preserves the warranty),
or refer to the HDD compatibility list in Appendix C for recommended HDD models. If installing an HDD, use the following
instructions.
> > > OPENING THE DVR ENCLOSURE WILL VOID THE WARRANTY < < <
The HDD you install must be compatible with the DVR hardware. Refer to the HDD compatibility list in this appendix.
CAUTION
The DVR must be powered o when installing an HDD.
To install the HDD, do the following:
1. Power o the DVR and disconnect the power adapter.
2. Remove the DVR top cover.
3. With the front panel facing you, nd the HDD. It is located in the right-front corner.
4. Carefully disconnect the power/data cable connector from the HDD.