Specifications

Page 4
Front Panel LEDs
No. Name Description
A
CH1~16
Indicates that the channel is being recorded.
B
HDD
Indicates that the system is accessing the hard disk.
C
ALARM
Indicates that sensor(s) is/are triggered or motion is detected.
D
NETWORK
Indicates that a network client is connected
E
BACKUP
Indicates that a USB or DVD-RW device contains stored data
F
POWER
Indicating that the system is switched on.
Front Panel Buttons
No. Name Description
1
Channel keys. For channel 10, press the 0 key. For channel 11, press the +10 and 1 key. For
channel 16, press the +10 and 6 key.
2
In playback mode, press to rewind the recording. Press again to increase the rewind
speed.
3
Press to select an audio mode:
MUTE – Mute all 4 channels.
SINGLE - Highlighted channel only.
MIX - Mix all 4 channels.
4
Jump/step backward. In playback mode, the playback position moves 60 seconds
backward.
5
In playback mode, press to fast forward the recording. Press again to increase the fast
forward speed.
6 Press to enable/disable ALARM operation.
7 Jump/step forward. In playback mode, the playback position moves 60 seconds forward.
8 Press to start or stop manual recording.
9 In live display mode, press to open the SEARCH menu.
10 In playback mode, press to play/pause the footage.
11 Press to open the SETUP menu.
12
Enable/disable the automatic sequence of display of channels in full screen, quad, 9-split
display mode.
13 Press to control Pan/Tilt/Zoom operations.
14 Press to capture video in jpeg format in live or playback mode.
15
 (LEFT)
Press to move left or to change the values in Setup mode. It is also used as the number 4
when entering password.