Setup guide

15
NOTE
Depending on your system BIOS conguration, Windows may try to boot through the RocketRAID card; ignore this screen, and allow the server to initialize.
2. Open the Device Manager window. (Go to Start u Control Panel u Device Manager.) If this is the rst time this controller card is used in the chassis, in the Other devices list you should see a
device named RAID Controller with an alert status. It should be the only device with an alert status.
3. Right click on RAID Controller to select it, then click Update Driver Software in the pop-up menu. See above.
4. In the Update Driver Software - RAID Controller window, click the option to Browse my computer for driver software.
5. If your computer didn’t nd drivers for the RocketRAID controller card in your computer, use the CD included with the STR-CTRL board, or download drivers from the web.
a. To install les from the CD provided:
i. Load the CD into the optical drive
ii. Open the CD in a le browser
iii. Copy the path to the CD for use in the window below.
b. To nd drivers on Internet:
iv. Search for: HighPoint RocketRAID 2711 drivers.
v. Follow the prompts to download drivers for the RocketRAID 2711 card for a Microsoft Windows 7 operating system.
vi. Save the download le to a location on your computer or network, then decompress the le (Extract All... ) to a directory.
vii. Copy the path to the directory for use in the window below.